Defects · Fridge
Cooling is poor and the compressor clicks, fails to start or runs without effective cooling. A failed relay can resemble compressor failure. Replacement should follow measured diagnosis, not sound alone.
Start here
Cooling is poor and the compressor clicks, fails to start or runs without effective cooling.
A failed relay can resemble compressor failure. Replacement should follow measured diagnosis, not sound alone.
A model-specific approach
Test the start device and electrical conditions before assessing compressor operation and the sealed refrigeration circuit.
The exact model and operating conditions determine which tests apply. These are possible inspection directions, not a list of components that must be changed.
Tell us whether the compressor starts briefly, stays silent or runs continuously.
Record the timing, previous work and accessible model label. Do not remove covers or handle live, refrigerant or pressurised components to obtain information.
Completion
Where sealed-system work is required, leak testing and an appropriate cooling check are part of assessing the result.
Discuss which operation was checked and what to observe during normal use. Keep the service date, model and work description if you need to report the symptom again.
Related information
10 questions for this page
Yes. Start-device and electrical checks should come before concluding that the compressor itself is defective.
No. Heat load, door leakage, controls and refrigerant conditions can also influence running time.
Ask about supply, start components, compressor operation and relevant sealed-system findings supporting the diagnosis.
Yes. Humming is an observation; electrical and mechanical checks are needed to establish why it cannot start.
No. Compatibility, control design and refrigerant specifications must match the particular appliance.
Yes. Ask which sealed-system procedures and checks are included, not only the price of the component.
No. Sound may guide inspection, but it cannot replace measured checks on the appliance.
Discuss overall repair value before proceeding. A compressor repair may not address unrelated cabinet or control problems.
Starting the motor is not enough. The refrigerator must demonstrate the relevant cooling performance after appropriate recovery.
Share the model, whether the unit starts or clicks, how both compartments cool and any previous sealed-system repair.
Let’s take the next step
Tell us the appliance, the problem and your locality.