Defects · Fridge
The fridge produces a new rattle, scrape, repeated click or unusually loud hum. Brief clicks and some fluid movement can be normal. A new sound with poor cooling needs a closer check.
Start here
The fridge produces a new rattle, scrape, repeated click or unusually loud hum.
Brief clicks and some fluid movement can be normal. A new sound with poor cooling needs a closer check.
A model-specific approach
Identify when the sound occurs and inspect levelling, contact points, accessible fans and the compressor start cycle.
The exact model and operating conditions determine which tests apply. These are possible inspection directions, not a list of components that must be changed.
Record a short audio or video clip and note whether opening the door changes the noise.
Record the timing, previous work and accessible model label. Do not remove covers or handle live, refrigerant or pressurised components to obtain information.
Completion
The technician should compare the original sound with operation after any adjustment or repair.
Discuss which operation was checked and what to observe during normal use. Keep the service date, model and work description if you need to report the symptom again.
Related information
10 questions for this page
No. Some operating clicks are normal. Repeated clicks with failed startup or poor cooling need closer attention.
Contact vibration or unstable positioning may amplify sound. Safe clearance and levelling should be checked.
It can in some designs. The fan and any cause of ice accumulation should be assessed together.
It can help identify a fan-related sound on relevant models. It is a clue, not a confirmed diagnosis.
No. Operating conditions, mounting and start behaviour need evaluation before a major replacement decision.
Record a short clip from a safe distance and note the cycle timing, door position and cooling condition.
Some fluid sounds may be normal. Compare a new sound with the model’s guidance and any change in performance.
Describing the sound and when it occurs helps distinguish rotating parts, vibration and starting problems.
No. Do not touch internal or hot components. Let the technician inspect mounting and operating conditions safely.
The original sound should be reassessed under similar operating conditions, along with the appliance’s cooling performance.
Let’s take the next step
Tell us the appliance, the problem and your locality.