Defects · Fridge
The cabinet stays warm even though the refrigerator is connected to power. A warm fridge does not automatically need gas. Airflow, defrost, control and compressor faults can produce similar symptoms.
Start here
The cabinet stays warm even though the refrigerator is connected to power.
A warm fridge does not automatically need gas. Airflow, defrost, control and compressor faults can produce similar symptoms.
A model-specific approach
Compare freezer and fresh-food temperatures, check door seals and airflow, then test the start circuit and cooling system as needed.
The exact model and operating conditions determine which tests apply. These are possible inspection directions, not a list of components that must be changed.
Note whether the freezer is still cold and when cooling first weakened.
Record the timing, previous work and accessible model label. Do not remove covers or handle live, refrigerant or pressurised components to obtain information.
Completion
Cooling recovery must be observed after repair; it is not instantaneous when the cabinet and contents are warm.
Discuss which operation was checked and what to observe during normal use. Keep the service date, model and work description if you need to report the symptom again.
Related information
10 questions for this page
Yes. Restricted airflow, a fan issue or frost can affect the fresh-food section even when the freezer remains cold.
No. Door leakage, airflow, defrost, electrical and control faults must be considered before refrigerant work.
A temporary thaw or control reset can mask the cause. Tell the technician how long the improvement lasts.
Yes. Food placement can restrict circulation; use the clearances recommended in your model instructions.
It shows the lamp circuit has power, not that the compressor, fans or cooling controls are functioning correctly.
Repeated changes make the original behaviour harder to assess. Record the setting and follow the model manual.
No. A compressor can run while airflow, refrigerant or mechanical problems prevent normal cooling.
It depends on the model, cabinet warmth and contents. Ask the technician when and how to reassess temperature.
Yes. Warm air entering through a gap can increase the cooling load; the seal and door alignment need inspection.
State whether the compressor starts, whether lights or displays work, and when the loss of cooling began.
Let’s take the next step
Tell us the appliance, the problem and your locality.