Defects · Fridge
The refrigerator is silent, has no display, or will not begin a cooling cycle. A working interior lamp confirms only part of the power path. It does not prove that the compressor receives the correct supply.
Start here
The refrigerator is silent, has no display, or will not begin a cooling cycle.
A working interior lamp confirms only part of the power path. It does not prove that the compressor receives the correct supply.
A model-specific approach
Check the supply, plug condition, control settings, start relay and model-specific electronic controls.
The exact model and operating conditions determine which tests apply. These are possible inspection directions, not a list of components that must be changed.
Describe whether the lamp, display and compressor are all inactive or only one is affected.
Record the timing, previous work and accessible model label. Do not remove covers or handle live, refrigerant or pressurised components to obtain information.
Completion
The technician should confirm reliable starting and safe operation without repeated manual resets.
Discuss which operation was checked and what to observe during normal use. Keep the service date, model and work description if you need to report the symptom again.
Related information
10 questions for this page
The appliance supply path, settings, start circuit or controls may be affected. Room lighting alone does not verify its supply.
Yes. Lighting and compressor operation involve different circuits and controls; inspection must go beyond checking the bulb.
It may involve a start device, supply condition or compressor problem. The sound alone cannot identify the failed component.
Avoid repeated rapid cycling. Record the behaviour and arrange inspection instead of repeatedly attempting to force a start.
Some models have special modes. Check the exact manual and tell the technician what the display shows.
No. Display operation and cooling must be assessed together; a supply or control fault can affect either or both.
Note whether the interior light, display, fan sound and compressor activity are all absent or only some are missing.
It can happen, but timing does not prove surge damage. The supply and appliance circuits still require diagnosis.
No. The relay should be tested in context; another electrical or compressor fault may produce the same symptom.
The technician should confirm appropriate starting and operation without repeated resets, using the conditions relevant to the fault.
Let’s take the next step
Tell us the appliance, the problem and your locality.