Defects · Washing machine
The programme starts but little or no water enters. The machine cannot fill correctly if the external water supply is restricted, even when its valve works.
Start here
The programme starts but little or no water enters.
The machine cannot fill correctly if the external water supply is restricted, even when its valve works.
A model-specific approach
Check tap supply, hose routing, inlet screens, valve operation and level-sensing controls.
The exact model and operating conditions determine which tests apply. These are possible inspection directions, not a list of components that must be changed.
Describe whether the problem affects every programme and whether the household tap has water.
Record the timing, previous work and accessible model label. Do not remove covers or handle live, refrigerant or pressurised components to obtain information.
Completion
Filling should stop at the appropriate level without a slow leak through the valve.
Discuss which operation was checked and what to observe during normal use. Keep the service date, model and work description if you need to report the symptom again.
Related information
10 questions for this page
Supply, hose, valve or control conditions may prevent filling even though the door lock operates.
Yes. External supply should be considered before replacing an appliance component.
Report the slow-fill pattern and whether other taps have normal supply. The restriction needs to be located.
Yes. A programme-specific complaint can provide different clues from failure on every selection.
Yes. The technician can assess screens and supply routing using the model’s arrangement.
No. Supply, level information and controls can trigger a filling complaint without a defective valve.
The outlet arrangement or unintended drainage may need checking alongside the inlet side.
Yes. Where separate connections exist, tell the technician which programmes or supply paths are affected.
No. Follow safe model-specific instructions or leave inspection to the technician.
The washer should admit water appropriately and stop filling at the intended stage without continued seepage.
Let’s take the next step
Tell us the appliance, the problem and your locality.