Defects · RO water purifier
The purifier keeps running or discharging reject water after the tank should have filled. Some reject-water flow is part of RO operation. Continuous flow after the expected stop point needs a model-specific assessment.
Start here
The purifier keeps running or discharging reject water after the tank should have filled.
Some reject-water flow is part of RO operation. Continuous flow after the expected stop point needs a model-specific assessment.
A model-specific approach
Check tank level detection, automatic shut-off, inlet valve, pressure controls and the purification flow path.
The exact model and operating conditions determine which tests apply. These are possible inspection directions, not a list of components that must be changed.
Observe whether the storage tank fills and whether the noise or reject flow stops at any point.
Record the timing, previous work and accessible model label. Do not remove covers or handle live, refrigerant or pressurised components to obtain information.
Completion
Verify both the filling cycle and automatic stop rather than judging only the first water produced.
Discuss which operation was checked and what to observe during normal use. Keep the service date, model and work description if you need to report the symptom again.
Related information
10 questions for this page
The purifier keeps running or discharging reject water after the tank should have filled.
Check tank level detection, automatic shut-off, inlet valve, pressure controls and the purification flow path.
Some reject-water flow is part of RO operation. Continuous flow after the expected stop point needs a model-specific assessment.
Observe whether the storage tank fills and whether the noise or reject flow stops at any point.
Verify both the filling cycle and automatic stop rather than judging only the first water produced.
No. The RO water purifier model determines the components, operating sequence and compatible parts. Check tank level detection, automatic shut-off, inlet valve, pressure controls and the purification flow path.
Replacement is not assumed before diagnosis. Some reject-water flow is part of RO operation. Continuous flow after the expected stop point needs a model-specific assessment.
Call 9342652963 between 8 AM and 8 PM with the symptom and your locality. Observe whether the storage tank fills and whether the noise or reject flow stops at any point. Same-day attendance is subject to availability, and repair completion may need another visit.
Explain what improved after previous work and when the symptom returned. The purifier keeps running or discharging reject water after the tank should have filled. Note whether the current behaviour is identical or different.
Ask for the diagnosed cause, proposed work, parts or materials and the amount before approving. Verify both the filling cycle and automatic stop rather than judging only the first water produced.
Let’s take the next step
Tell us the appliance, the problem and your locality.